Case studies
Metal Fabrication & Finishing case studies
Compressed air, gas and air-quality monitoring in shops where the utilities and the safety case overlap.
3 of our 19 case studies are in this sector.
A real page with its own address (§B.2), reachable from the Industries hub, the sector page and the library’s industry rail.
What we found in factories like these.
Compressed airManufacturing — automotive, plastics & rubberMetal Fabrication & Finishing
Compressed air leaks in a stamping operation
A Tier 2 automotive stamping factory
The most expensive utility per unit of work, leaking into an empty building overnight.
20–30%of compressor output
Illustrative scenario
Compressed airNatural gasMetal Fabrication & FinishingBuilding Materials, Concrete & Aggregates
A furnace over-cycling, seen on the air and gas traces together
A heat-treating operation
Short-cycling that neither the gas bill nor the air system showed alone.
2 utilitieson one chart
Illustrative scenario
Temperature & humidityMetal Fabrication & FinishingManufacturing — automotive, plastics & rubber
Welding bay CO and CO₂ monitoring
A metal fabrication shop
Air quality in the welding bay, watched continuously instead of checked quarterly.
Continuousvs. quarterly
Illustrative scenario
Illustrative scenarios carry the ribbon, no client name and no logo.
We would like to see what these numbers look like in your factory.
Half a day on your floor, no charge and no obligation. At the end of it we tell you what we saw, what we would meter first, and what the return looks like.
Book a site visitRun the numbers
or call 1-833-QUANTFY (1-833-782-6839)